T-type cooling water exhaust entry fitting

This fitting is intended to be used when space considerations make it more convenient to inject cooling water approximately level with the outlet of the exhaust manifold, while the inlet to the water lift muffler is some distance below. In these installations, the inner pipe of the fitting directs incoming water downward, and safely away from the exhaust manifold.

The OD of the thread size of the fitting is 1 1/4” NPT. The OD of the inner nipple is 1/4” NPT which conforms to the ID of 1/2” water hose.
(EXHT_01.2_334)

Manufactured in the USA