Manifold stud – long
(1-3 required)
This stud is a nominal 1/4″ longer than the standard manifold stud, so as to accommodate a few of the latest aftermarket manifolds manufactured by the Barr Company, and/or to allow for the additional thickness of the Universal throttle bracket used on some engines.
(OBLK_04.1_113.1)
Atomic 4 rebuilds typically require the following studs:
(studs can be found in our “Studs” catalog section)
Late Model:
Head studs: 13
Thermostat housing: 2
Lifting eye bracket: 2
Manifold: 3
Early Model:
Head studs: 13
Cross over tube: 2
Lifting eye bracket: 2
Manifold: 3