Oil pressure safety switch, closes above 6 PSI, (+/- 2) psi
Includes a 90 degree elbow with extension nipple so that when possible, the switch can face upward. This orientation is more resistant to water draining on to the connections and corroding the terminals on the switch. Switch style may vary. While the factory location for this kit installation uses the 1/8″ port above the oil pressure regulating valve, the kit may also be installed just behind the flywheel with the oil pressure sender, using a brass T and a 1.5″ brass nipple (not included, but available in our brass section).   Check out oil pressure safety switch kit video.
NOTE: Except for warranty exchange, this electrical item is not returnable.