Control Panel Enclosure 12″

Gauges not included. Enclosure backplate is not drilled, allowing for different arrangements and sizes of gauges, fuse holders, switches, etc.
This enclosure is an ideal choice for installations where a minimal protrusion is desired and the instrument panel may be subjected to frequent exposure to weather and/or spray. Constructed of sturdy ABS plastic, the enclosure also features a clear acrylic hinged spray shield. The bottom edge of the recess is sloped to facilitate drainage. Four mounting holes are predrilled in the corners of the exterior flange and four #8 Philips flat-headed stainless mounting screws are included.
The flat gauge mounting surface is 10-1/4″ in width and 7-1/4″ in height. Outside dimensions are 12″ x 9-3/8″, required cutout: Approx. 8″ x 10.5″, and the nominal depth from the front of the panel to the back plate is 1-¼”. These enclosures are capable of accommodating (6) two inch gauges or equivalent.

(GAUG_16_556)